Repair, grinding, consulting, training

TKM Service for the Printing & Packaging Industry

TKM Service for the Printing and Packaging Industry

Our services are divided into repair and regrinding service as well as user advice and training on the customer's premises. For the efficient use of our products, we are not only available to our customers as a supplier and consultant, but also accompany them as a competent partner through all phases of their daily business. With the accurate advice of our specialists, we support our customers in the selection of the right tool for their individual application.

✔ User Advice & Training ✔ Regrinding Service ✔ Repair Service


User Advice

  • Actual state survey and technical advice
  • Development of a service concept
  • Service routing and sustainability
  • Documentation, analysis, research and development

Doctor Blade Analysis

TKM Meyer GmbH offers customers an analysis of their doctor blades. Different analyses, such as cross-sectional and doctor blade angle analysis, are performed. An exact doctor blade angle can be determined 100% bya doctor blade angle analysis only. Due to many influences on the printing machine, such as cylinder circumference, NIP, doctor blade pressure setting or hydrodynamic pressure, a determination of the doctor blade angle is very unreliable.



Request Doctor Blade Analysis



On request, we also organise application-specific training courses at your premises. We take your special requirements into account and actively support you in improving quality, efficiency and economy - in all printing and finishing processes.

Training Topics

  • Application-specific training
  • Technical cutting seminars
  • Circular knife training courses

Request Service now


Grinding Service

Our circular knives can optionally be provided with a specially polished grinding on both sides. This leads to a significant increase in service life and less dust formation. For particularly high-quality surfaces, we lap the cutting tools - or grind them in the classic way.

Advantages of Lapped Circular Knives:

  • Optimal cutting pattern
  • Up to 40 % less dust
  • Up to 4 times longer service life than a comparable conventional knife
  • Chipping on the knife is reduced to a minimum

Our services at a glance:

  • Sharpening- and grinding service for:
    • Paper drills
    • Paper cutting knives
    • Multi-groove knife blicks
  • Unique and patented grinding technolgies for:
    • Circular knives
    • Paper cutting knives
    • Three way trimmer knives

Request your non-binding offer for a grinding service now .

We are also at your disposal by phone: +31 (0) 10 45 999 45 or via mail: 


Repair Service

In addition to folding and counter-flaps, gripper bars and pads as well as traps are also processed. You can expect the TKM spare parts we repaired to have the same manufacturing tolerances as our newly manufactured parts. If required, we replace the Vulkollan® inserts or re-coat the surfaces with different ceramics or tungsten carbides. On demand, we support the reconditioning process with measurement reports, which record the condition of the component before and after the repair.

Gladly, we are also at your disposal by phone: +49 4532 400 0 or via mail: 

Service Request

Do you have any questions, or would you like to order a service? Then please use the following form.
Of course we are also at your disposal by phone or e-mail.

TKM Meyer GmbH
+49 4532 400